Plug & Play Box For IP Cameras
 |
IP-Video Alarm Sensor - especially in outdoor areas -
|
Intelligent Video Analysis
 |
3D-Video-Sensor (3D-Calculation based on the third dimension of the image) |
|
Configuration of sensitivity, direction of detection, fade out of light |
|
Raise an alert only by objects of defined size |
|
„electronic fence“ for ignoring not relevant areas |
- Eliminating most of the inconsequential activities in wide area analysis
- Capable to recognise relevant movements for an alarm e.g. intruders, vehicles
- Intelligent analysis and not only „pixel counting“ of common motion detection
- Reliable alerting especially in outdoor areas
Easy integration in new or existing IP-networks und Video Management Systems (e.g. milestone, NetAvis, SeeTec, … ):
- Runs on embedded system with designated IP-address using Linux OS
- Capable of connecting two IP-cameras
- Viewer and configurator by web interface
- Pure alarm trigger-functionality for Video-Management-Systems
| Software-Specification IP-Video Sensor |
| Video standard |
IP – JPEG (Motion JPEG), MPEG2*, MPEG4* |
| Resolution / Image Size |
NTSC: 320 x 240, 640 x 480*
PAL / CIF: 352 x 288, 384 x 288, 704 x 576*, 768 x 576* |
| Frames per sec |
min. 2 images / sec (2 FPS)
max. 25 images / sec (25 FPS)* |
| Input |
via IP 1-2 Cameras |
| Viewer |
via 3rd party systems |
| Recording |
trigger of 3rd party systems |
| Compression |
JPEG |
| Storage |
via 3rd party systems |
| Operating mode |
Triplex |
| Remote Control |
via IP Ports / Web Browser |
| Password |
yes |
| Configuration |
via Web-Browser |
| Sensor |
Camera selective settings, 3D Sensor, full image
analysis, electronic fence to eliminate certain
areas, 2 level sensor for indoor and outdoor,
automatic blocking of areas out of the detection
area, ignore object sizes that are to small
or to large. |
| Actions |
Trigger via com-port or TCP / IP to 3rd party
systems |
| Storage |
Motion trigger via 3rd party systems in various
fps and resolutions*
Save of the images of the last alarm in the sensor:
Pre-alarm images, alarm images, protocol
images. |
| Display |
via web browser / via:sys PC-Client Software
or 3rd party systems |
|
* by integration to 3rd party system
(e.g. NetAvis, SeeTec, milestone, etc.) |
|
| Hardware-Specification |
| Operating System |
OS Linux on μCPU (ETRAX 100 LX) |
| Specification of HW |
10 / 100 BaseTX Fast Ethernet
RS 232 serial port
Flash Memory 8 MB (4,5 MB for applications)
RAM 32 MB
Power 9-24 VAC (or DC), 9.6 VA, power
consumption 2.8-3.2 VA
Temperature +5°C to +50°C,
Humidity 8-80% RHG |
 |
| Distribution |
Please contact:
viasys IV GmbH
Werner-Heisenberg-Str. 4
D – 63263 Neu-Isenburg
Diese E-Mail-Adresse ist gegen Spambots geschützt! Sie müssen JavaScript aktivieren, damit Sie sie sehen können.
Phone +49 6102 - 364668
Fax +49 6102 - 364680 |
|
